END USER LICENSE TERMS
WEATHERDESK
Version 05-25-2021
These WeatherDesk license terms (the “License Terms”) are entered into by Maxar Technologies Inc. (“Maxar”) and Customer and contain the general terms relating to Customer’s access to and use of the Product, whether licensed from an Affiliate of Maxar or from a Certified Reseller of Maxar. The applicable Customer Agreement sets forth the terms pursuant to which Customer purchased its use of the Product.
By signing or otherwise indicating acceptance of a Customer Agreement or downloading, accessing or using any Product licensed under an “WeatherDesk License,” you, on behalf of Customer, are accepting and agreeing to be bound by these License Terms. If you are entering into these License Terms on behalf of a company, other legal entity or government agency, you represent that you have the authority to bind that entity to the terms and conditions of these License Terms. Capitalized terms used in these License Terms are defined in Section 14 of these License Terms
1. PRODUCT. During the Term, Maxar will provide Customer the Product in accordance with the parameters set forth in the Customer Agreement and/or Product Specification.
2. LICENSE GRANT.
2.1 GRANT OF LICENSE. Subject to Customer’s compliance with these License Terms and the applicable Customer Agreement, including payment of all applicable fees, Maxar grants to Customer a non-exclusive, non-transferable, limited fee-based license to allow its Authorized Users to access the Product during the Term solely for Customer’s Internal Use as follows:
(a) access and use the Maxar Platform; and
(b) access, analyze, download, use, and make Derivatives of, the Content.
2.2 OTHER CONTENT. Content may include Third Party Content that is subject to Third Party license terms, as described in the Product Specification. Notwithstanding anything to the contrary in these License Terms, if Customer’s subscription includes access to Third Party Content, Customer understands and agrees that use of such Third Party Content is subject to the applicable Third Party Terms identified in the Product Specification, or provided by Maxar upon request. If there is any inconsistency between these License Terms and the terms and conditions of the applicable Third Party Terms, the Third Party Terms will apply to that Third Party Content.
2.3 AUTHORIZED USERS. Customer will ensure that each Authorized User complies with these License Terms. Customer is responsible and liable for all acts and omissions of Authorized Users relating to the Product, including any violation of these License Terms. A breach of these License Terms by an Authorized User is deemed to be a breach by Customer.
3. PRODUCT CHANGES. During the Term, Maxar reserves the right to revise the Product Specification to reflect changes in, among other things, laws, rules, regulations, technology, industry practice, Product usage, and the availability of Third Party Content. Updates to the Product and Product Specification under this Section will not materially decrease the overall functionality of the Product during the Initial Term set forth in the Customer Agreement. Customer is responsible for all Internet, communication, hardware and other costs associated with its Authorized Users’ access to and use of the Product. New or revised Content and/or Tools that are made available to Customer as a part of its existing subscription may be subject to different use rights and restrictions. Customer understands and agrees that these revised terms will be communicated to Customer via email or posting in the Product or on the Maxar Platform and are effective upon this notice. New or revised Content and/or Tools that are made available to Customer at Customer’s request may require Customer to affirmatively agree to new or revised terms and conditions in the form of an amendment to these License Terms or a new agreement.
4. TERM.
4.1 TERM. The term for a subscription Product will begin on the Start Date and will continue for the Initial Term set forth in the Customer Agreement, unless terminated in accordance with Section 12 of these License Terms (the “Initial Term”). The Initial Term may consist of one or more Contract Years. If Auto-renew is selected on the Order Confirmation, then upon the expiration of the Initial Term, the term will automatically renew for successive one (1) year periods (each a “Renewal Term” and collectively with the Initial Term, the “Term”). For all non-subscription Products, the Term will begin upon delivery of such Products to Customer or Certified Reseller, whichever occurs first.
4.2 LICENSE TERM. The license term for the licenses granted under Section 2.1 (b) is perpetual, unless otherwise set forth in the Customer Agreement or Product Specification.
5. RESTRICTIONS.
5.1 DELIVERY. Unless otherwise set forth in the Customer Agreement or Product Specification, Products are made available to Customer and its Authorized Users online via a Maxar Platform. In most cases, Customer’s account will be activated within five (5) business days following the Start Date. The Product is deemed to be delivered when Customer has been provided credentials to access the applicable Maxar Platform and Maxar sends an email notifying Customer that either (i) the subscription has been activated, or (ii) for non-subscription Products, the Products are ready for download. Customer has thirty (30) days to access and download non-subscription Products.
(a) Authorized Access. Authorized Users will access the Maxar Platform via the Internet by means of a specific account and passwords provided by Maxar. Customer is solely responsible for the confidentiality, security and use of its passwords and account. Maxar will have the right to rely upon any information received from any person using a password or other security measures assigned to Customer and will incur no liability for this reliance.
(b) Restrictions on Use. Customer is responsible for Authorized Users’ access and use of the Maxar Platform and compliance with these License Terms. Customer will use commercially reasonable efforts to prevent unauthorized access to and use of the Maxar Platform and will notify Maxar promptly of any unauthorized use of which it is aware.
(c) Disabling Devices. Customer will use commercially reasonable efforts, including using a Virus detection/scanning program, in order to remove any Disabling Devices from its systems that may be transmitted to or otherwise present any harm to Maxar’s systems. If Customer determines that a Disabling Device has been transmitted to the systems or computers of Maxar, Customer will notify Maxar promptly of the transmission and the nature of the Virus or other device. Maxar may disable Customer’s access to the Maxar Platform and other Maxar computing systems and/or networks to protect Maxar’s computing systems and/or networks from a Disabling Device or if Customer breaches any of the security measures established by Maxar, including access or attempted access to the Maxar Platform by any unauthorized person. Maxar will notify Customer if it disables Customer’s access as soon as reasonably possible thereafter.
(d) Anonymous Data. Maxar may collect and use Anonymous Information and disclose it internally and to its third party service providers, to support and improve Maxar’s operations, offerings, products, and services. Maxar may also use Anonymous Data for product marketing, research and development activities. Customer understands and agrees that Maxar owns all Anonymous Information and Maxar is not restricted from using or disclosing such Anonymous Data in any way.
5.2 USE RESTRICTIONS. Customer recognizes and agrees that the Product is the property of Maxar and contains valuable assets and proprietary information of Maxar and its suppliers, as applicable. Accordingly, except as expressly permitted in these License Terms, Customer will not, and will not permit any Authorized User to (i) distribute, sublicense, transfer, assign, rent, sell, lease, loan, make publicly available, publish or otherwise convey access to or use of the Product or Derivatives to anyone other than Authorized Users; or (ii) use the Product or Derivatives for the business needs of any Third Party, including without limitation, providing any services to any Third Parties.
In addition, Customer will not, and will not permit any Authorized User to:
(a) Use the Product, Content, or Derivatives to improve the accuracy of any other satellite imagery via algorithmic processing or any other method;
(b) Remove, bypass or circumvent any electronic or other forms of protection included on or with the Product;
(c) Alter, obscure or remove any copyright notice, copyright management information or proprietary legend contained in or on the Product;
(d) Modify or use the Product, Content, Derivatives, or the Maxar Platform in any manner that infringes upon the Intellectual Property Rights of another entity, or violates any applicable laws;
(e) Reverse engineer, disassemble, decompile or otherwise attempt to derive the algorithms, source code, databases or data structures upon which the Product or Maxar Platform is based to the extent this restriction is permitted by law;
(f) Use the Product or Maxar Platform to store or transmit infringing, libelous, or otherwise unlawful or tortious material;
(g) Interfere with the operation of the Product or Maxar Platform or attempt to access data or computing resources not belonging to or intended for Customer;
(h) Use the Product, Content, or Derivatives for any activities where the use or failure of the Product could lead to death, injury, or property or environmental damage; or
(i) Otherwise use or access the Product, Content, Downloaded Content, or Derivatives for any purpose not expressly permitted under these License Terms, including, without limitation, for Commercial Purposes
5.3 NO SCRAPING. Customer is expressly prohibited from scraping or download Content in bulk, except to the extent permitted in the Product Specification. High frequency scripted access to the Maxar Platform is expressly prohibited. If Customer's account generates a high volume of transactions, Maxar reserves the right to set transaction limits. Maxar also reserves the right to set other usage policies in the Product Specification.
6. OWNERSHIP.
6.1 PRODUCT, CONTENT AND DERIVATIVES.
(a) Maxar. All right, title and interest in and to the Product (including all Content, Tools, and the Maxar Platform), and all corrections, enhancements, or other modifications made to the Product by Maxar or any Third Party at Maxar’s direction, and all Intellectual Property Rights therein are the sole and exclusive property of Maxar or its Affiliates or suppliers, as applicable.
(b) Customer. All right, title and interest, including all Intellectual Property Rights, in and to enhancements or modifications made by Customer in the creation of a Derivative and any new material contributed by Customer in the creation of a Derivative, but specifically excluding preexisting materials or Intellectual Property owned by Maxar, its Affiliates, or its suppliers, as applicable (including, without limitation, Content that is integrated, referenced, recast, transformed or adapted in the Derivative), are the exclusive property of Customer. However, notwithstanding the ownership rights of Customer in the enhancements, modifications and contributed materials, use of a Derivative by Customer is subject to the license and use restrictions set forth in these License Terms. All rights not expressly granted to Customer in these License Terms are reserved by Maxar.
6.2 FEEDBACK. Customer may provide suggestions and comments regarding usability, bug reports, test reports or other feedback (collectively, "Feedback"), regarding the Product. Customer agrees that: (i) Maxar may freely use, disclose, reproduce, license, distribute and otherwise commercialize improvements resulting from the Feedback in any Maxar product, technology or service; and (ii) Customer obtains no Intellectual Property Rights in any improvements to the Product or other products, technology, or services resulting from the Feedback and hereby expressly waives any such claims.
7. ATTRIBUTION. Customer will not delete, alter, cover or distort any copyright, trademark or other proprietary rights notice placed on or in the Product and will ensure that all notices are reproduced on all copies. All Downloaded Content and Derivatives include the following copyright notice on or adjacent to the Downloaded Content or Derivative: [Product] © [YEAR] Maxar Technologies. Certain Third Party Content may be subject to additional attribution requirements, as set forth in the Product Specification. Except as required in this Section 7, Customer may not use the trademarks, service marks, trade name, domain name or other source identifiers of Maxar, or its Affiliates or suppliers, without the express written consent of Maxar.
8. CERTIFICATION AND AUDIT. Upon Maxar’s written request, and not more than once per calendar year, Customer will certify its compliance with the Customer Agreement and these License Terms. Upon 30 days written notice and no more than once every twelve (12) months, Maxar may audit Customer’s compliance with the Customer Agreement and these License Terms. Customer will cooperate with Maxar’s audit and provide reasonable assistance and access to information and records. Audits will not unreasonably interfere with Customer’s normal business operations and will be subject to reasonable confidentiality requirements. If an audit results in a finding of non-compliance, Maxar may, at its discretion: (a) invoice any additional Fees due with interest as set forth herein and recover the cost of the audit if additional Fees exceed five percent (5%) of the Fees paid during the audit period; and (b) terminate these License Terms in accordance with Section 12 of these License Terms. Customer must pay the invoices issued under this Section within 30 days following the date of invoice.
9. INDEMNIFICATION BY CUSTOMER. Customer will defend, indemnify and hold Maxar, its Affiliates and its suppliers harmless from and against any claims that may arise against Maxar, its Affiliates and its suppliers out of Customer’s use of the Product, including, without limitation, a violation by Customer of the Customer Agreement or these License Terms.
10. LIMITED WARRANTY AND DISCLAIMER.
10.1 LIMITED WARRANTY. Maxar warrants that the Product ordered will materially comply with the Customer Agreement and/or Product Specification, as applicable. Maxar’s sole obligation and Customer’s exclusive remedy for a breach of this warranty is for Maxar, at its option and expense, to: (i) repair or replace the non-conforming Product; or (ii) terminate the applicable license and refund all Fees paid by Customer for the non-compliant Product. This limited warranty is void if any non-conformity has resulted from any accident, abuse, misuse, misapplication or modification of or to the Product by anyone other than Maxar or any breach by Customer of the Customer Agreement, including these License Terms. For a subscription Product, any claim under this warranty must be made within thirty (30) days following Customer's initial discovery of the non-conformity. For a non-subscription Product, any claim under this warranty must be made within thirty (30) days following delivery of the non-conforming Product.
10.2 DISCLAIMER OF WARRANTIES. EXCEPT AS EXPRESSLY WARRANTED IN THIS SECTION 10, THE PRODUCT IS PROVIDED “AS IS,” WITHOUT ANY WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, NON-INFRINGEMENT OR NON-MISAPPROPRIATION OF INTELLECTUAL PROPERTY RIGHTS OF A THIRD PARTY, CUSTOM, TRADE, QUIET ENJOYMENT, ACCURACY OF INFORMATION, CONTENT OR RESULTS, OR CONDITIONS ARISING UNDER ANY OTHER LEGAL REQUIREMENT. NEITHER MAXAR NOR ITS AFFILIATES OR SUPPLIERS WARRANT THAT THE PRODUCT WILL BE ACCURATE, CURRENT OR COMPLETE, THAT THE PRODUCT WILL MEET CUSTOMER’S NEEDS OR EXPECTATIONS OR THAT THE OPERATION OF THE PRODUCT WILL BE ERROR FREE OR UNINTERRUPTED. FURTHER, SPATIAL, SPECTRAL AND TEMPORAL ACCURACY IS NOT GUARANTEED.
11. LIMITATION OF LIABILITY. IN NO EVENT WILL MAXAR, ITS AFFILIATES OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOSS OR DAMAGE TO DATA, INACCURACY OF DATA, LOSS OF ANTICIPATED REVENUE OR PROFITS, WORK STOPPAGE OR IMPAIRMENT OF OTHER ASSETS OR LOSS OF GOOD WILL, WHETHER OR NOT FORESEEABLE AND WHETHER OR NOT A PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF THE DAMAGES AND NOTWITHSTANDING ANY FAILURE OF THE ESSENTIAL PURPOSE OF THESE LICENSE TERMS OR ANY LIMITED REMEDY HEREUNDER. IN NO EVENT WILL THE TOTAL LIABILITY OF MAXAR, ITS AFFILIATES AND ITS SUPPLIERS ARISING OUT OF OR IN CONNECTION WITH THE PRODUCT EXCEED THE FEES PAID BY CUSTOMER FOR THE PRODUCT GIVING RISE TO THE CLAIM IN THE TWELVE MONTHS PRECEDING THE FIRST INCIDENT OUT OF WHICH THE LIABILITY AROSE. THE FOREGOING LIMITATIONS APPLY TO ALL CAUSES OF ACTION IN THE AGGREGATE, INCLUDING WITHOUT LIMITATION, BREACH OF CONTRACT, BREACH OF WARRANTY, INDEMNIFICATION, NEGLIGENCE, STRICT LIABILITY, MISREPRESENTATION AND OTHER TORTS AND STATUTORY CLAIMS. THE FOREGOING DISCLAIMER WILL NOT APPLY TO THE EXTENT PROHIBITED BY LAW.
12. TERMINATION. These License Terms will remain in effect with respect to the subscription Products for the Term set forth in Section 4.1 and with respect to the Downloaded Content and non-subscription Products as set forth in Section 4.2, unless in either case, the Term is earlier terminated in accordance with this Section 12.
12.1 BY MAXAR. In addition to those termination rights set forth in Section 10 of these License Terms, Maxar may immediately terminate the license rights, and any associated subscription Term, upon written notice to Customer if Customer (a) breaches Sections 2, 5, 6, 7, 9, 13.6, 13.7, or 13.8 of these License Terms; or (b) materially breaches any other provision of these License Terms or the Customer Agreement and fails to cure the breach within thirty (30) days after receiving written notice. In addition, Maxar reserves the right to suspend Customer’s access to the Product or terminate these License Terms, effective immediately upon written notice, if Customer fails to pay any portion of the Fees when due within ten (10) days after receiving written notice from Maxar that payment is past due. Maxar may also suspend Customer’s access to the Product if Customer’s usage exceeds the usage limits set forth in the Order Confirmation or Product Specification. Fees will continue to accrue during any suspension.
12.2 BY CUSTOMER. Customer may terminate the Product license and any associated subscription Term at any time by (a) stopping use of the Product; (b) permanently deleting any Downloaded Content and Derivatives thereof from all devices and systems and destroying any copies on disk; and (c) certifying to Maxar in writing that it and its Authorized Users have ceased all use of the Product and that all copies of Products, Downloaded Content and Derivatives have been deleted or destroyed; however, Customer is still responsible for paying all license fees in full. Customer may terminate an auto-renewing Term by providing written notice at least thirty (30) days prior to the end of the then-current subscription Term.
12.3 EFFECT OF TERMINATION. Upon termination or expiration of these License Terms, Customer will immediately stop all use of the subscription Product, Content, and Derivatives thereof, and will cause its Authorized Users to do the same. The expiration or termination of these License Terms does not relieve either party of any obligations that have accrued on or before the effective date of the termination or expiration. However, Customer may continue to use any Downloaded Content or non-subscription Product licensed on a perpetual basis in accordance with these License Terms.
12.4 SURVIVAL. The duties and obligations of the parties under Sections 2.3, 4.2, 5.2, 6, 7, 8, 9, 10, 11, 12.3, 12.4 and 13 of these License Terms will survive expiration or termination of these License Terms.
13. GENERAL TERMS.
13.1 ENTIRE AGREEMENT. These License Terms, together with the Customer Agreement, constitute the entire agreement between the parties with respect to use of the Product and supersede all previous and contemporaneous agreements, understandings and arrangements, whether oral or written.
13.2 ASSIGNMENT. Customer may not transfer or assign any of its rights or delegate any of its obligations under these License Terms, in whole or in part and including any transfers by operation of law, without the prior written consent of Maxar. Any attempted assignment or transfer in violation of this Section will be null and void. These License Terms will be binding on and inure to the benefit of the parties and their respective permitted successors and assigns.
13.3 AMENDMENT. Except as set forth in Section 3 of these License Terms, these License Terms may be amended or supplemented only by a writing that refers to these License Terms and is signed by both parties.
13.4 WAIVER. The failure or delay by a party to require performance of any provision of these License Terms does not constitute a waiver. All waivers must be in writing and signed by the party granting the waiver. The waiver by a party of any of its rights or remedies in a particular instance will not be construed as a waiver of the same or a different right or remedy in a subsequent instance.
13.5 SEVERABILITY. If any provision of these License Terms is invalid, illegal or unenforceable, that provision will be deemed to be restated so that it is enforceable to the maximum extent permissible under law and is consistent with the original intent and economic terms of the invalid provision.
13.6 COMPLIANCE WITH LAWS. Customer is responsible for its own compliance with laws, regulations and other legal requirements applicable to the conduct of its business and these License Terms, and agrees to comply with all these laws, regulations and other legal requirements including, without limitation, the Foreign Corrupt Practices Act of the United States of America and the Convention on Combating Bribery of Foreign Government Officials.
13.7 INTERNATIONAL TRADE COMPLIANCE. The Product is subject to the customs and export control laws and regulations of the United States, Canada and any country in which the Product is manufactured, received or used, including, without limitation, the Export Administration Regulations and the International Traffic in Arms Regulations. Customer will comply with these laws, regulations and rules in the performance of its obligations under these License Terms. Further, Customer will not provide the Product to blocked, prohibited or restricted individuals and entities as required by the U.S. Department of Treasury Office of Foreign Assets Control (“OFAC”), including, without limitation, the Denied Persons List, Unverified List and Entity List. Customer will not knowingly do business with criminal organizations, terrorist organizations or other people or groups, either directly or indirectly, that are likely to use the Product for purposes that are illegal or adverse to the interests of the United States Government or Maxar generally. Customer will provide Maxar any additional information that Maxar may request periodically to verify Customer’s compliance with these License Terms.
13.8 DATA PROTECTION. If Customer’s use of the Product will involve the Processing of Personal Data, Customer will comply at all times with applicable laws, regulations and other legal requirements. Customer will ensure that it has in place a privacy policy that provides transparent communication of the Processing activities and the rights of Data Subjects. Additionally, Customer will employ adequate technical and organizational security measures to protect Personal Data against a personal data breach.
13.9 GOVERNING LAW AND DISPUTE RESOLUTION. All matters and disputes arising out of or in connection with this License Agreement will be governed by and construed under the laws and using the method of dispute resolution indicated below, based upon where Customer is domiciled:
| If Customer is domiciled in: | The governing law is: | Any suit, action or proceeding arising out of or relating to these License Terms must be: |
|---|---|---|
| United States of America, Canada, or Mexico | New York and controlling United States federal law | Instituted in the United States District Court for the Southern District of New York or the state courts located in New York, New York |
| Any other country | Laws of England & Wales | Finally settled under the Rules of Arbitration of the International Chamber of Commerce by arbitrator(s) appointed in accordance with those Rules. The place of arbitration shall be New York, New York, and any and all awards and other decisions shall be deemed to have been made there, without prejudice to the right of the arbitral tribunal to hold hearings, meetings, or sessions any place it deems appropriate. |
Each party irrevocably submits to the exclusive jurisdiction of the applicable court set forth above. However, each party will have the right at any time to seek a temporary or permanent injunction or other equitable remedy or relief in any court having subject matter jurisdiction anywhere in the world. With respect to arbitration, there will be one arbitrator and the language of arbitration will be English. The party or parties prevailing in any legal actions, arbitration or other proceeding relating to this License Agreement, whether in arbitration, at trial or upon appeal, will be entitled to recover reasonable attorneys’ fees and other costs and expenses incurred, in addition to any other relief to which it may be entitled. The parties agree that the United Nations Convention on Contracts for the International Sale of Goods does not apply to this License Agreement.
13.10 NOTICES. All notices of termination or breach must be in writing in English and addressed to the other party’s legal department. Notice of termination by Customer and routine correspondence should be sent to weatherdesk@maxar.com. The email address for legal notices to be sent to Maxar is legalservices@maxar.com. Notice is treated as given upon receipt, as verified by written or automated receipt or electronic log, as applicable.
13.11 CONTROLLING LANGUAGE. These License Terms are drafted in the English language only. English will be the controlling language in all respects, and all versions of these License Terms in any other language are for accommodation only and will not be binding on the parties.
14. DEFINITIONS.
"Affiliate" means any legal entity controlling, controlled by or under common control with a party, where “control” means (a) the ownership of at least fifty percent (50%) of the equity or beneficial interest of the entity; (b) the right to vote for or appoint a majority of the board of directors or other governing body of the entity; or (c) the power to direct or cause the direction of the management and policies of such party by any means.
"Anonymous Information" means usage statistics about device and use of the Product that does not specifically identify a customer or individual Authorized User, such as aggregated and analytics information about use of the Product. For the avoidance of doubt, Anonymous Information does not include Personal Data.
"Authorized User" means an employee or Contractor who is authorized by Customer to use the Product on behalf of Customer.
"Certified Reseller" means a reseller authorized by Maxar to resell licenses to use the Product.
"Commercial Purpose" means redistribution, retransmission or publication in exchange for a fee or other consideration, which may include, without limitation: (a) advertising; (b) use in marketing and promotional materials and services on behalf of a customer, client, employer, employee or for Customer’s benefit; (c) use in any materials or services for sale or for which fees or charges are paid or received; and (d) use in any books, news publication or journal.
"Content" means all information, reports, imagery, and data, including Third Party Content and Information Products, licensed or made available by Maxar in any form, or included in or made accessible via the Product.
"Contract Year" means that 12-month period beginning on the Start Date and each subsequent 12-month period, or portion thereof if the subscription is terminated in accordance with Article 12.
"Contractor" means an individual contracted by Customer, either directly or through a consulting company or other entity, to provide services on behalf of or for the benefit of Customer.
"Customer Agreement" means (a) with respect to a Customer that purchases a license to use the Product from Maxar or an Affiliate of Maxar, that agreement consisting of the applicable Order Confirmation, these License Terms, and any Supplemental Order Confirmation that references the Order Confirmation; and (b) with respect to a Customer that purchases a license to use the Product from a Certified Reseller, that agreement between the Certified Reseller and Customer pursuant to which Customer receives a license to the Product.
"Customer Content" means shapefiles, KML files, software, applications, tools, algorithms, models, methods or other data owned or controlled by Customer and used or stored by Customer in the Product.
"Customer" means that individual, legal entity or government agency that has purchased a license to use the Product either directly from Maxar or from a Certified Reseller.
"Data Subject" means an identifiable natural person.
"Derivative" means any addition, improvement, update, modification, transformation, adaptation or derivative work of or to Content, including, without limitation, reformatting of Content into a different format or media from which it is delivered to Customer; any addition or extraction of data, information or other content to or from Content; or any copy or reproduction of Content.
"Maxar Platform" means a technology platform provided by Maxar, including the computer hardware, software, Tools, and all other resources, upon which applications, processes or other technologies can be hosted and/or developed, used by Maxar to make Product available to, and usable by, Customer via the Internet.
"Disabling Device" means any computer software, code or device, including any Virus, intended for or capable of disrupting, disabling, damaging, destroying or otherwise harming or impeding in any manner the operation of, or providing unauthorized access to, a Product, Content, or a Maxar Platform.
"Downloaded Content" means any Content downloaded or extracted from a Maxar Platform by the Customer or Third Party using Customer’s account credentials.
"Information Products" means extracted data layers, shapefiles, vectors, summary, analysis or other report, dataset or other information that may include excerpts of satellite imagery or aerial photography, and which may be made available via the Product.
"Intellectual Property Rights" means all past, present, and future trade secret rights, patent rights, copyrights, moral rights, contract rights, trademark rights, service marks, and other proprietary rights in any jurisdiction, including those rights in inventions, software, domain names, know-how, technology, methods, processes, information and technology.
"Internal Use" means use solely for the internal business purposes of Customer subject to those restrictions set forth in Section 5 of these License Terms, and not for any Commercial Purpose.
"License Terms" has the meaning set forth in the Preamble.
"Order Confirmation" means that agreement or other document prepared by Maxar that sets forth the Product(s) Maxar offers to license to Customer and the related terms and that is presented to Customer for acceptance. A quotation that includes an estimated fee is not an Order Confirmation.
"Personal Data" means any information that directly or indirectly identifies a Data Subject, such as a name, an identification number, location data, an online identifier or one or more factors specific to the physical, physiological, genetic, mental, economic, cultural or social identity of that natural person.
"Processing" means any operation that is performed on Personal Data, whether or not by automated means, such as collection, storage, alteration, use, dissemination or destruction.
"Product Level" means a specific combination of Content, tools, and/or features, as described more fully in the Product Specification, and as designated in the Customer Agreement.
"Product Specification" means with respect to the Product and each type of Content, the description and specification published by Maxar and available upon request.
"Product" means any of the WeatherDesk products, including all Content and Tools, as described in the applicable Customer Agreement
"Start Date" means the date that Maxar delivers access credentials to Customer or Certified Reseller, whichever is first.
"Supplemental Order Confirmation" means that agreement or other document prepared by Maxar and accepted by Customer that supplements or modifies the Customer's existing subscription to the Product, and which references the original Order Confirmation associated with that subscription.
"Term" means that period of time during which Customer has valid access credentials to use the Product, as set forth on the Customer Agreement or a Supplemental Order Confirmation. The period of time that Customer is entitled to use non-subscription Products, Downloaded Content and Derivatives thereof may be different, as set forth in Section 4.2 of these License Terms.
"Third Party Content" means any content, software or other data that is owned by a Third Party and not owned by Maxar or its Affiliates.
"Third Party Terms" means those terms and conditions that apply to the use of Third Party Content.
"Third Party" means any individual, corporation, limited liability company, partnership, other organization or government agency that is not a party to these License Terms and is not an Affiliate of Maxar.
"Tools" means all software, applications, APIs, tools, algorithms and other support resources made available by Maxar on the Maxar Platform or included in the Product.
"Virus" means any computer instructions, devices or techniques that can or were designed to threaten, infect, assault, defraud, disrupt, damage, disable, alter, inhibit or maliciously shut down software and/or a computing environment.
[END OF WEATHERDESK LICENSE TERMS]
